Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 30k BTU Coil 95Pct Furnace 026 MBH 15.2 SEER2
Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 30k BTU Coil 95Pct Furnace 026 MBH 15.2 SEER2
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 30k BTU Coil 95Pct Furnace 026 MBH 15.2 SEER2
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
- Heating Input (BTUH):
- 026 MBH Heat
- Includes:
- H4A6S24AKAWA, N95ESN0261410A, EAM4X30L14A, ACGKIT2
- Nominal Capacity (BTUH):
- 24000
- Cooling Efficiency (EER2):
- 12.5
- Cooling Efficiency (SEER2):
- 15.2
- Heating Efficiency HSPF2:
- A/C is Energy Star 6.1 compliant
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Single Stage
- System Coil Configuration:
- Multi Position "A" Coil
- Furnace Efficiency:
- 95
- System Nominal Tons:
- 2.0 Ton
- AHRI System Number:
- 208083663
A/C, Single Phase, Split Gas Furnace Single Stage, Multi Position "A" Coil H4A6S/N95ESN/EAM4X
Air Conditioner Condenser
Air Conditioner Condenser
- 80% AFUE
- Flame roll-out sensors standard
- Category I venting
- Blocked vent switch
- Louvered door
- 24 VAC and 115 VAC humidifier terminal
- Electronic air cleaner terminal
- Select sizes approved for twinning, refer to accessory kit listing
- N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
- Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
- Adjustable heating blower OFF delay
- Factory set blower ON delay
- RPJ aluminized steel heat exchanger
- High temperature limit control designed to prevent overheating
- Direct ignition with Silicon Nitride igniter
- One piece prepainted steel cabinet
- In-shot burners
- 33 1/3” (847mm) high, for ease of installation
- Quarter turn knobs for easy door removal and secure attachment
- Factory shipped for natural gas, convertible to propane with accessory kit
- Four position - upflow/downflow/horizontal (left/right) installation
- Three position inducer elbow capability
- Through the casing flue pipe for counterflow applications
- Common venting with other Category I appliances
- Masonry chimney adapter available
- Self diagnostics
- Slide out blower assembly
- Efficient multi-speed ECM blower motor
- Induced draft combustion motor
- Single-stage gas valve
- RPJ® (Rigid Press Joint) primary heat exchanger, stainless steel secondary heat exchanger
- Sound-reducing features: soft mounted blower and inducer motor
- Compatible thermostat: heat/cool
- Heating capacity: 26,000–140,000 BTUh
- Single-stage operation and fixed speed blower motor for even levels of temperature control and comfort
- Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
- Air purifier and humidifier compatible
- High temperature limit control prevents overheating
- Corrosion resistant aluminum tube
- Bolt-on TXV metering device factory installed on all models (equalizer tube brazed in)
- TXV and manifold positioned to the side for easier cleaning
- Innovative drain pan design for complete water removal
- Two condensate drain connections (Additional two for horizontal installation)
- 2-piece delta plate for easier removal and cleaning
- Cabinet widths match flush with Arcoaire gas furnaces
- Hemmed flanges for safer handling
- Foil faced insulation
- Non-sweat cabinet, even at extreme conditions
- Cabinets meet or exceed 2% air leakage codes
- Sturdy, 22 gauge, pre-painted steel cabinet
- One or two UV light knock-outs provided on cabinet (depending on size)